Carli 14-25 Ram 2500/3500 Dominator Isolator Support Weld In

Description

Carli Suspension

Carli Dominator Isolator Support Weld-In Kit

The Carli Dominator Isolator Support Weld-In Kit provides a permanent solution for the limited coil spring support found in the factory Ram coil buckets. The factory bucket uses only a small indexing hole to support the isolator and coil, while the lower coil seat angle can create forward and inward spring pressure that may lead to coil bowing, flattened isolators, or springs shifting out of position.

Machined from solid mild steel, these weld-in isolator supports add the coil retention needed for trucks running larger shocks, extended travel, and aggressive off-road use. Once installed, they are nearly hidden under the factory isolator and help keep the coil spring securely in place.

Key Features:

• Provides increased support for front coil springs

• Helps prevent coil bowing, slipping, and isolator deformation

• Machined from solid mild steel

• Weld-in installation

• Designed to reinforce the factory coil bucket area

• Nearly hidden once installed under the factory isolator

• A necessary upgrade when running 3.0 inch shocks

• Built for Ram 2500/3500 4×4 applications

Notes:

• Requires front suspension disassembly, cleaning of the factory coil bucket, welding, priming, and painting.

• Standard Ram 2500/3500 spring isolators must be used when installing these supports.

• If equipped with Power Wagon isolators, they must be replaced with standard isolators before installation.

• Standard isolator part number: 05168566AB.

• Power Wagon isolator part number: 68268825AA.

• Standard isolators have a 3.875 inch internal diameter.

• Power Wagon isolators have a 3.25 inch internal diameter.

Vehicle Fitment:

• 2014–2023 Ram 2500 4×4

• 2013–2023 Ram 3500 4×4

SKU: CS-DD30-14-COILRETAINER